Razor work gives you a soft, tapered end that no shear produces — and a razor is only as good as the blade in it. The part that trips people up is compatibility: Dannyco sells razors and blades as separate identities on purpose, and the wrong refill is a wasted order.
This guide lays out the razors we carry, the blades we carry, and — plainly — which razors we stock that we do not stock blades for.
What we carry
- 2-in-1 Stainless Steel Haircutting Razor — stainless steel, Japanese-made, packaged with one razor and one blade.
- 2-in-1 Double-Use Razor Blades – 10-Count Dispenser — ten blades in a safety dispenser.
- 3C Stainless Steel Haircutting Razor – Flat Handle — stainless steel, flat handle.
- Nikky Single-Edge Razor Blades – 60-Blade Box — frozen-tempered, Teflon-coated, 12 packs of five.
- Original Magic Haircutting Razor — replaceable-blade system, model 112C.
The compatibility table — read this before ordering
This is the whole guide in one place. Dannyco publishes the fit for each product, and we are reproducing it rather than inferring anything.
- 2-in-1 razor takes 2-in-1 Double-Use blades. Those blades also fit compatible Feather handles.
- 3C razor is designed for PERS-BLC and NIK-BLAC (Nikky) blades. We stock the Nikky blades. We do not currently stock PERS-BLC.
- Nikky blades fit the Dannyco Nikky razor and the 3C.
- Original Magic (112C) takes blade references 9020-BLC, 8095C and BP9010. We do not currently stock any of those three.
Two honest consequences of that table:
If you want a razor and a supply of refills from us in the same order, buy the 3C with the Nikky 60-blade box, or the 2-in-1 with the 2-in-1 10-count dispenser. Those are the two complete systems on this page.
If you buy the Original Magic, source its blades elsewhere. It is a good razor and we stock it, but we would rather tell you that up front than have you discover it when the first blade drags.
The 2-in-1 system — and what "double-use" actually means
The 2-in-1 Stainless Steel Haircutting Razor is a Japanese-made stainless steel handle, and the package includes one razor and one blade, so it is usable the moment it arrives. It is the right starting point if you are adding razor work to your service list rather than replacing an existing system.
The 2-in-1 Double-Use Razor Blades are the refill: ten blades in a safety dispenser, and each blade provides two exposed working sections. That is what double-use means here — when the first section starts to drag, you reposition to the second rather than binning the blade. Ten blades, twenty working edges.
The safety dispenser matters more than it sounds. Loose blades in a drawer are the most common source of a cut hand in a salon; a dispenser means you only ever touch the blade you are installing.
The 3C and Nikky system — for volume
The 3C is a stainless steel razor with a flat handle. A flat handle sits differently in the hand from a contoured one: it gives a more direct, pencil-like hold, which suits stylists who razor with small controlled strokes.
The Nikky Single-Edge Blades come as 12 packs of five for 60 blades total, and Dannyco publishes two construction details worth knowing:
- Frozen-tempered. A heat-treatment process applied to the steel. Dannyco states it; Dannyco does not publish a resulting hardness figure, so we will not put a number on it.
- Teflon-coated. The coating reduces friction between the blade and the hair, which is what you feel as a cleaner glide through the section and less drag on the first stroke.
Sixty blades is a box for a salon that razors regularly, not a trial pack. If razor cutting is a listed service, this is the economical way to buy.
When a razor is the right tool
A razor cuts each hair at an angle, so the end finishes as a taper rather than a blunt face. That is why razored ends move differently, sit softer against the head, and blend into each other instead of stacking into a visible line.
- Yes: soft layering, removing weight from thick hair without the stepping a toothed shear can leave, shags and lived-in shapes, softening a fringe, texture through the ends.
- Careful: fine hair, where a tapered end can read as thin rather than soft.
- No: hair that is already dry and damaged, and any cut whose point is a blunt line. A razor cannot produce a hard line, and dragging a razor through compromised hair opens the cuticle further.
Blade discipline
Blades are consumables, and the discipline around them is not optional.
- Change the blade when it drags. A dull razor blade does not cut the hair, it tears it — and a torn end frays. Drag is the signal, not a blade count.
- One client, one fresh edge. Not a suggestion.
- Work on controlled sections and keep your fingers clear of the edge. Razor cuts to the stylist happen during sectioning, not during the stroke.
- Dispose of blades per your local salon safety procedure — a sharps container, not the bin.
- Clean and dry the handle after use, and do not bend the blade holder. A sprung holder will not seat a blade square, and a blade that is not square will not cut straight.
The bottom line
Starting razor work → the 2-in-1, which arrives with a blade, then 10-count refills at two working sections each. Razoring at volume → the 3C and the Nikky 60-blade box. The Original Magic is here, and its blades are not.
See the range in the Dannyco collection, and the shears guide for the cutting side of the kit.