Good shears last for years when you look after them, and a neglected pair can lose its edge in weeks. The routine below takes a minute a day and a few minutes a week. It applies to straight cutting shears and to thinning shears alike.
After every client
- Wipe hair and product residue off both blades with a soft, dry cloth.
- Disinfect by wiping with a disinfectant suitable for metal tools. Never soak the shear: liquid trapped in the pivot causes rust and stiffness.
- Dry the blades and the pivot area completely.
- Close the shear and put it back in its case or holder. Don't leave it loose on the station or in a drawer with other tools.
Oil the pivot
Open the blades to about 90 degrees, put one drop of shear oil at the pivot where the blades meet, then open and close a few times so it works in. Wipe off any excess so it doesn't end up on the hair. Once a week is a good baseline; oil more often if you cut wet hair all day or work in a humid salon. A pen-style oiler such as the Olivia Garden shear care oil pen puts the drop exactly where it's needed.
Check the tension
Tension is how freely the blades move. Too loose and the shear folds hair instead of cutting it; too tight and your hand tires and the blades wear faster.
The quick test: hold the shear by the finger ring with the blades pointing up, lift the thumb blade to 90 degrees and let it go. It should drop to about a third closed. If it falls fully shut, tighten the screw slightly; if it barely moves, loosen it. Shears with an adjustable tension screw, like the Otto 6-inch cutting shear, let you set this by feel.
Protect the edge
- Cut hair only. Paper, tape, wigs and synthetic fibre dull the edge quickly.
- Don't drop it. A fall can bend a blade or knock the tips out of alignment.
- Keep the blades closed when you put the shear down or carry it.
When to have it sharpened
Book a professional shear sharpener when the shear starts folding or pushing hair, catches at the tips, sounds gritty or shows a visible nick. Never use a household knife sharpener: it destroys the angle of a convex edge. Many stylists have their shears serviced once or twice a year, depending on how much they cut.
Frequently asked questions
Which oil should I use? Oil made for hair-cutting shears. It's light enough not to gum up the pivot and won't mark the hair.
Do thinning shears need the same care? Yes. Clean between the teeth with the cloth, and oil and check the tension the same way.
New to buying shears? See how to choose professional hair cutting shears.